Skip to main content Skip to navigation Skip to search

Alstom Announces Successful Results of Mountaineer Carbon Capture and Sequestration (CCS) Project

Press Contacts

Visit our media section and follow the link "Press contacts"

PITTSBURGH, PA At a prominent industry conference on carbon capture and sequestration (CCS), Alstom Power announced the successful operation of a chilled-ammonia CCS validation project at American Electric Powers Mountaineer Plant in New Haven, WV. The project, the worlds first facility to both capture and store carbon dioxide (CO2) from a coal-fired power plant, represents a successful scale-up of ten times the size of previous field pilots (WE Energies Pleasant Prairie, EON Karlshamn).

It achieved:

  • Capture rates from 75% (design value) to as high as 90%,
  • CO2 purity of greater than 99%,
  • Energy penalties within a few percent of predictions from Alstoms process simulation model,
  • CO2  injection levels of approximately 7,000 tons/month (the equivalent of taking 17,000 cars off the road),
  • Robust steady-state operation during all modes of power plant operation including load changes,
  • Availability of the CCS system greater than 90%.

All the achievements listed above have been confirmed during long-term, steady-state operation of the CCS validation plant.

The formal testing program for the validation project has now been successfully completed.  Analysis of the operating results have validated the predictions of Alstoms process simulation models in terms of energy penalties, CO2 capture rates and ammonia losses, providing further confidence in the robustness of the design for a large-scale demonstration project planned for Mountaineer that would have the ability to capture up to 1.5 million metric tons per year of CO2.

In addition, operating and performance feedback from the initial validation project have resulted in several design improvements that are incorporated into the next phase project at Mountaineer. The first phase of the CO2 capture project, which began capturing CO2 in September, 2009 and started storing it in October, 2009, underwent mechanical and equipment modifications in the Fall of 2010 that contributed to the success of the project.  The plant will continue to operate until June 30th with a focus on maximizing CO2  injection. 

We are extremely fortunate to have been able to work with American Electric Power on this important project.  By partnering with AEP, we have been able to advance the technology while at the same time raising awareness of the need for CCS technology to address CO2 emissions from new and existing coal and natural gas power plants, said Patrick Fragman, Alstoms VP, Environmental Control Systems & CO2 Capture Systems.

AEPs Mountaineer plant is a 1,300-megawatt electrical (MWe) coal-fired unit that was retrofitted in 2009 with Alstoms patented chilled ammonia CO2 capture technology on a 20-MWe portion, or slipstream, of the plants exhaust flue gas.  The slipstream of flue gas is chilled and combined with a solution of ammonium carbonate, which absorbs the CO2 to create ammonium bicarbonate.  The ammonium bicarbonate solution is then is pressurized and heated in a separate process to safely and efficiently produce a high-purity stream of CO2.  The CO2 is being compressed and piped for storage into deep geologic formations, roughly 1.5 miles beneath the plant surface. 

In all, Alstom has a total of nine validation projects operating or actively being developed to optimize the three major technologies it is pursuing: chilled ammonia, advanced amines, and oxy-firing. The projects are taking place in Europe and North America, reinforcing Alstoms standing as a global company committed to developing technology solutions that can be used around the world.

Press contacts 

Tim Brown 
Tel: (202) 495 4968Cell: (860) 713 9530